The source for industrial and commercial roofing tools, equipment and service in the Midwest.

Low Profile Mechanical Shears - LM412, LM510, LM810

TENNSMITH's Low Profile LM Series mechanical shears utilize a low maintenance design, coupled with an array of standard features for an attractive combination of high value and solid performance. The LM412 and LM510 incorporate the unique 2x-F back gauge system. This allows the operator to move the backstop from 0 to 24 inches in approximately 2 seconds with only two rotations of the handle. The LM810 incorporates the same 2x-F system, but with the add capacity of 30-Inch travel. An optional digital readout is available for this system.

The LM Series shears are standard with four-edge, high carbon, high chrome top and bottom blades, independent, self-leveling hold down feet with neoprene inserts, single, continuous and jog stroke cycles, motor reverse switch, precision-machined table with hand well, dual inch/metric inlaid bed scales, and non-metallic gibs.

LM412:

  • Maximum shearing capacity, mild steel: 12 gauge / 2.5 mm
  • Maximum shearing capacity, stainless steel: 16 gauge / 2.0 mm
  • Maximum cutting length: 52-1/2" / 1334 mm
  • Back gauge range: 24" / 610 mm
  • Strokes per minute, full length: 40
  • Number of holddown feet: 8
  • Motor-230 / 460v, 3-phase, 60 Hz: 5 HP
  • Dimensions, LxWxH: 72 x 69 x 56"
  • Shipping weight: 3200 lbs / 1455 kg

LM510:

  • Maximum shearing capacity, mild steel: 10 gauge / 3.5 mm
  • Maximum shearing capacity, stainless steel: 14 gauge / 2.0 mm
  • Maximum cutting length: 60-1/2" / 1525 mm
  • Back gauge range: 24" / 610 mm
  • Strokes per minute, full length: 35
  • Number of holddown feet: 12
  • Motor-230 / 460v, 3-phase, 60 Hz: 7.5 HP
  • Dimensions, LxWxH: 81 x 69 x 56"
  • Shipping weight: 4000 lbs / 1815 kg

LM810:

  • Maximum shearing capacity, mild steel: 10 gauge / 3.5 mm
  • Maximum shearing capacity, stainless steel: 14 gauge / 2.0 mm
  • Maximum cutting length: 97" / 2464 mm
  • Back gauge range: 30" / 762 mm
  • Strokes per minute, full length: 35
  • Number of holddown feet: 14
  • Motor-230 / 460v, 3-phase, 60 Hz: 10 HP
  • Dimensions, LxWxH: 116 x 72 x 56"
  • Shipping weight: 6800 lbs / 3091 kg