The source for industrial and commercial roofing tools, equipment and service in the Midwest.

Manual Slip Rolls SR-Series

TENNSMITH's slip rolls combine precision-turned, ground and polished high carbon steel rolls with heavy-duty, cast iron end frames and a welded steel base to make an accurate and durable forming tool.

Convenient operating features include large roll adjusting screws, scales for speeding repeat set-up, and a front-mounted handle to lift the upper roll for material removal. Wire grooves are standard.

SR24:

  • Capacity, mild steel: 20 gauge / 1.0 mm
  • Maximum forming length: 24" / 610 mm
  • Diameter of rolls: 2" / 51 mm
  • Minimum forming radium: 1" / 25 mm
  • Wire grooves: 3/16, 1/4, 5/16" / 5, 6.5, 8 mm
  • Shipping weight: 190 lbs / 86 kg

SR36:

  • Capacity, mild steel: 22 gauge / .75 mm
  • Maximum forming length: 36" / 914 mm
  • Diameter of rolls: 2" / 51 mm
  • Minimum forming radium: 1" / 25 mm
  • Wire grooves: 3/16, 1/4, 5/16" / 5, 6.5, 8 mm
  • Shipping weight: 250 lbs/113 kg

SR42:

  • Capacity, mild steel: 24 gauge / 0.6 mm
  • Maximum forming length: 42" / 1067 mm
  • Diameter of rolls: 2" / 51 mm
  • Minimum forming radium: 1" / 25 mm
  • Wire grooves: 3/16, 1/4, 5/16" / 5, 6.5, 8 mm
  • Shipping weight: 270 lbs / 122 kg

SR48:

  • Capacity, mild steel: 16 gauge / 1.6 mm
  • Maximum forming length: 49" / 1244 mm
  • Diameter of rolls: 3" / 76 mm
  • Minimum forming radium: 1-1/2" / 38.1 mm
  • Wire grooves: 3/8, 1/2, 5/8" / 9.5, 12.7, 15.8 mm
  • Gearing ratio: 4 : 1
  • Shipping weight: 775 lbs / 351.5 lbs